FAQ | DruSoL

전체검색

사이트 내 전체검색

Customer

FAQ

Total 13건

  • How does DruSoL work?

    1. Inflow of cleaning liquid
    - Once the cleaning liquid is introduced into the machine, the cleaning liquid passing through the Stator is transferred to the Rotor.
    2. Rotor operation
    - The rotor rotates smoothly at high speed through the Input Shaft.
    3. decelerator operation
    - The reducer converts the fast rotation of the rotor to a stable speed and delivers it to the Output Shaft.
    4. Tee housing and nozzle housing rotation
    - The tea housing rotates smoothly around the DruSoL body and the nozzle housing around the tea housing.
    5. cleaning pattern
    - The tea housing and nozzle housing move in harmony, and the cleaning liquid is sprayed through the two nozzles.

  • What is the difference between Spray Ball and Drew SoL

    1. 1. Spray Ball
    - Because liquid is sprayed through many holes, the pressure is weakened and the injection power is weak
    - Difficulty cleaning surfaces effectively due to weak spraying force
    - a lack of accuracy
    2. 2. DruSoL
    - Concentrate energy on two nozzle holes to create a powerful jet stream
    - Stable rotation and jet stream combination to remove residue
    - 360° pattern covers all the inner surface of the tank

  • What is the difference between Rotary Spray Ball and DruSoL?

    1. 1. Rotary Spray Ball
    - Cleaning by physical spraying is weak and is dependent on liquid cascading effects or chemical cleaning agents
    - Requires significant amounts of liquid and sanitizer for cleaning
    - Too fast to rotate under pressure, resulting in poor cleaning efficiency

    2. 2. DruSoL
    - Powerful jet stream creates physical impact and cleans
    - Less cleaning liquid and cleaning agent than Rotary Spray Ball
    - High cleaning efficiency as the rotational speed change is not significant compared to the change in pressure

  • Why is a strong impact important?

    1. The jet stream of fluid produced by DuSoL creates a powerful impact.
    - This increases the physical cleaning power of the cleaning object.
    2. Spray Ball and Rotary Spray Ball have less cleaning power than DruSoL even with more washing water and chemical cleaning agents.
    - The reason is that the physical cleaning power is weak.
    3. The reason why DuSoL has high cleaning efficiency with the same or less resources is that it can make a powerful impact.

  • What is the difference between DuSoL and 3 or 4 nozzle produ…

    The DruSoL is a two-nozzle rotary jet nozzle.
    Two-nozzle products such as DuSoL create a stronger impact under the same conditions as three to four nozzle products.
    On the other hand, 3 to 4 nozzle products have a high space cover speed.
    However, the space cover speed is faster in Spray Ball and Rotary Spray Ball.
    Since strong impact is the most important advantage of rotary jet injection nozzles, a form that can increase the impact as much as possible is advantageous for cleaning.
    The effect difference due to the actual space cover speed is not significant.

  • Is it possible to clean if there is an obstacle in the tank?

    1. DruSoL 세척노즐은 탱크 내부의 장애물의 크기가 작다면 세척하는 데 큰 문제는 없습니다.
    2. 그러나, 탱크 내부의 블레이드, 배관 등과 같은 장애물은 "음영" 문제를 초래할 수 있습니다.
    3. 장애물이 크거나 세척 수준이 높아야 할 경우, 단일의 DruSoL 세척으로는 효과가 부족할 수 있습니다.
    4. 큰 장애물 주변을 효과적으로 세척하기 위해서는 여러 대의 DruSoL 운용으로 세척할 필요가 있습니다.
    5. 효과적인 세척을 위해서는 다양한 환경의 구체적인 검토를 통해 결정해야 합니다.
    6. 더 자세한 사항은 (주)두루쏠과 상담하십시오.

  • Can DruSoL use chemical cleaning liquid?

    DuSoL basically uses water, but there is no problem with using various chemicals and acid/alkali solutions and other cleaning agents together.
    It is also particularly suitable for spraying organic solvents.
    This is a great advantage of DuSoL because it is appropriate and allows you to choose a variety of cleaning methods.

  • What is Full Cycle?

    1. It is called a full cycle when DruSoL draws a certain spray pattern when washing and rotates a total of 45 times.
    2. After 45 repetitions of the spray pattern, the position is gradually shifted and cleaned by covering the entire 360° tank interior.
    3. When the full cycle is complete, it returns to the initial injection point.

  • Does DruSoL always have to be cleaned with Full Cycle?

    No, it can be driven within a full cycle depending on the condition of the residue inside the tank.
    However, depending on the condition, it may be necessary to clean more than the full cycle.
    As a result, companies have set the level of Cycle Time with numerous self-tests and evaluations since its introduction.
    This is the know-how of companies, so they are reluctant to disclose it and become an element of improving competitiveness.

  • What is the range of the pressure and flow rate of the DruSo…

    Please refer to the table in the product introduction (DruSoL) section on the website.

  • What is the range of the cleaning radius of DruSoL?

    Please refer to the table in the product introduction (DruSoL) section on the website.

  • If you turn the rotator part (te-housing, nozzle housing) by…

    Yes, right.
    Internal gears are bitten and cannot be forced to rotate from the outside.
    If forced to rotate, the internal components will be damaged.

  • What is the procedure for the A/S of DruSoL?

    1. Fast A/S processing with domestic products
    - It is widely known that it usually takes a long time to repair foreign products.
    - DruSoL is a domestic product that allows rapid A/S processing.

    2. Provide disassembly inspection and repair estimates
    - If you send the product for the repair of DuSoL, we will quickly provide you with an estimate for the repair after undergoing a disassembly inspection first.

    3. Repair program time
    - When a contract for a product repair is signed, the repair program is usually completed within 24 to 48 hours.

    We will do our best to ensure that the A/S of your DuSoL products can be carried out with minimal time and high quality.

검색